Not Sure What You’re Looking For?

2018 Cub Cadet PRO Z 760S KW

$11,499.00


Availability
Brochure
Year
2018
Manufacturer
Cub Cadet
Model
PRO Z 760S KW

Overview

Description

Steering
  • Lap Bar / Steering Wheel Control: High Performance Steering Wheel with electronic power steering & Foot-pedal Control
  • Lap Bar / Steering Wheel Adjustment: Multi-position Quick-adjust steering column
Chassis
  • ROPS: 2 in. x 2 in. spring-latch tool-less foldable 3 position
  • Front Axle / Yolks: 2 in. x 3 in. solid axle tube with ISO dampening suspension and 1/2 in. thick steel front yokes
  • Rear Bumper: 5/16 in. Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch
  • Frame: Fully welded, full-length 3/8 x 5 in. laser cut steel / integrated tie-down slots
Operation
  • Rear Tires: 24 in. x 12 in. - 12 in. (Turf Tread)
  • Cruise Control: Standard - Foot operated pedal engagement
  • Park Brake / Braking: Hand-operated lever with integrated hydro pump release lever
  • Throttle/PTO/Key Switch: HD Low-profile throttle lever, sealed key switch & electronic fingertip engagement pto
  • Seat Type: High-back dial suspension with EVC cushion, padded arm restsISO mounted base (lateral suspension) angle back adjust and lumbar supportseat belt
  • PTO Clutch: Warner PTO Clutch (200 ft. lb.) with Soft-Start
  • Front Tires: 16 in. x 6.5 in. - 8 in. turf
  • Safety Systems: Operator presence
Mower Deck
  • Rolled Leading Edge Reinforcement: 1/4 in. (.250 in.) steel
  • Top Reinforcement(s): 7ga. (.187 in.) top plate
  • Bottom Reinforcement: 7ga. (.187 in.) bottom plate
  • Deck Height Adjustment: Foot pedal with spring assist 16 Positions
  • Side Construction: 5/16 in.(.313) steel on trim and discharge sides
  • Spindle Construction: 8 in. sealed cast aluminum housing (maintenance-free)
  • Deck Size/Type: 60 in. FABRICATED DECK
  • Spindle Covers: Steel - Tooless Quick Release
  • Discharge Chute: High-density, impact-resistant rubber
  • Cutting Height: 1 in. - 5 in.
  • Trim-Side Wear Guard: 3/4 in. Thick UHMW-PE Replaceable Trim-side Wear Guard
  • Deck Material: fabricated 7ga. (.187") steel shell
  • Blade-Tip Speed (Approx): 18,500 fpm
  • Deck Blades: Triple-blade / High-lift blade (standard) Marbain Blade
  • Anti-Scalping: 2 Front HD w/ Bushings & Grease Zerk
  • Deck Style/Construction: 7ga. top plate 7ga. bottom reinforcement 1/4" rolled leading edge
General
  • Cup Holder: Intergrated into Side Pod
  • Hour Meter: Standard electronic
Warranty
  • Warranty: 3 year / no hour limit commercial warranty and 5 year / 1,750 hour limited deck construction warranty
Engine & Drive System
  • Ground Speed: Fwd: 12 mph / Rev: 6 mph
  • Horsepower / CC's: 31hp - 999cc
  • Engine Type: Kawasaki FX921v
  • Fuel Capacity: Twin 7.45 gal. tanks (14.9 gal. total) with electronic fuel gauge
  • Transmission: Parker HTG 14cc pump 280cc wheel motor
Dimensions
  • Weight (approx): 1562 lb.
  • L / W / H with discharge chute UP and ROPs DOWN: 86 in. L x 62 in. W x 52 in. H

Specs

Engine

Horse Power
31hp - 999cc
Engine Type
Kawasaki FX921v

General

Transmission
Parker HTG 14cc pump 280cc wheel motor
Fuel Capacity
Twin 7.45 gal. tanks (14.9 gal. total) with electronic fuel gauge

Deck

Deck Size
60 in. FABRICATED DECK

Promotions